Dissemination

Plan for Dissemination

Dissemination

Publications concerning the MIMOSA project are listed here (they can also be found on Zenodo):

  • Federica Portis, Giorgio De Pasquale. “Shape Optimization of Metal Parts from Filament-Based AM Processes Based on Structural and Dimensional Analysis”, ECCOMAS M2P Conference, 2023.

  • Federica Portis, Giorgio De Pasquale. “Structural and Fluidic Analysis of Vertical Stabilizers with Co-Cured Metal-Composite Joints”, ECCOMAS M2P Conference, 2023.

  • Giorgio De Pasquale, Antonio Coluccia. “Modeling and Experimental Validation of CFRP-Metal Joints Utilizing 3D Additively Manufactured Anchors”, Journal of Manufacturing Science and Engineering, 145(11), 111004–1 (2023).

  • Giorgio De Pasquale, Fikret Enes Altunok. “Investigation of the Mechanical Strength of CFRP with Co-Cured Additively Manufactured Metal Inserts”, Procedia Structural Integrity, 47, 573–578 (2023).

  • Antonio Coluccia, Giorgio De Pasquale. “Strain-based method for fatigue failure prediction of additively manufactured lattice structures”, Scientific Reports, 13, 22775 (2023).

  • Alessandro De Zanet, Sara Varetti, Evanthia Pappa, Ciro Annicchiarico, Alfredo Ricciardi, Marco Pagone, Nicola Gallo, Abhishek Kumar, Giorgio De Pasquale. “Novel Multimaterial Hybrid Joining Process for CFRP-Metal Structures in Aviation Industry”, The 10th International Conference on Structural Analysis of Advanced Materials (ICSAAM), Zakynthos (Greece), 2023.

  • Fikret Enes Altunok, Giorgio De Pasquale. “Numerical Cohesive Zone Modeling (CZM) of Self-Anchoring AM Metal-CFRP Joints”, Fracture and Structural Integrity, 68, 280–295 (2024).

  • Alessandro De Zanet, Sara Varetti, Evanthia Pappa, Mirjam Spuller, Jurgen Lackner, Ciro Annicchiarico, Abhishek Kumar, Nicola Gallo, Marco Russi, Bernardo Destito, Giorgio De Pasquale. “Coating for improved adhesion and corrosion resistance of a novel multimaterial hybrid AM AlSi10Mg – CFRP joint for aviation”. Int. Symp. on Dynamic Response and Failure of Composite Materials (DRAF), Ischia (Italy), 2024.

  • G. De Pasquale, “Additive manufacturing process optimization for innovative aluminum-carbon fibre reinforced polymer co-cured joints”, Metal AMS, Cetim, Senils (France), 2024.

  • G. De Pasquale, F.E. Altunok, C. Annicchiarico, N. Gallo, “Fluidic-structural modeling of loads transfer across AM-CFRP joints on flight structures”, proc. 3rd Int. Conf. on Nonlinear Solid Mechanics (ICoNSoM), Cagliari (Italy), 2024.

  • Sara Varetti, Alessandro De Zanet, Evanthia Pappa, Ciro Annicchiarico, Abhishek Kumar, Nicola Gallo, Mattia Cabrioli, Matteo Vanazzi, Fikret Enes Altunok, Bernardo Destito, Giorgio De Pasquale. “AlSi10mg additively manufactured anchors for a novel multimaterial hybrid joining for aerospace”, Society for the Advancement of Material and Process Engineering Europe Conference (SAMPE), Belfast (Ireland), 2024.

  • Evanthia Pappa, Alessandro De Zanet, Sara Varetti, Boris Fošnarič, Tina Černelič, Fikret Enes Altunok, Luca Margaria, Ciro Annicchiarico, Nicola Gallo, Abhishek Kumar. Giorgio De Pasquale. “Specifications, and mechanical performance of novel hybrid joint for aerospace applications”. The 10th International Conference on Structural Analysis of Advanced Materials (ICSAAM), Cyprus (Greece), 2024.

  • Alessandro De Zanet, Evanthia Pappa, Sara Varetti, Jurgen Lackner, Mirjam Spuller, Fikret Enes Altunok, Ciro Annicchiarico, Nicola Gallo, Abhishek Kumar, Giorgio De Pasquale. “Surface engineering for enhance interlocking in AlSi10Mg-CFRP joints in aviation”. The 10th International Conference on Structural Analysis of Advanced Materials (ICSAAM), Cyprus (Greece), 2024.

  • F.E. Altunok, F. Quarta, G. De Pasquale, "Modeling of local meso-scale interactions in metal-composite joints based on 3D anchors matrix", proc. Int. Conf. on Composite Structures (ICCS27), Ravenna (Italy), 2024.

  • A. Coluccia, G. De Pasquale, "Fatigue behavior of 316L steel structural lattice beams under four-points-bending symmetric cyclic loading", proc. Int. Conf. on Composite Structures (ICCS27), Ravenna (Italy), 2024.

  • G. De Pasquale, "Strutture aeronautiche multimateriale basate su manifattura additiva metallica", proc. A/AS Conference, Napoli (Italy), 2024.

  • G. De Pasquale, F.E. Altunok, F. Quarta, "Multi-scaled failure analysis of rivets-free joints between AM metals and CFRP", proc. 10th Int. Conf. on Engineering Failure Analysis (ICEFA), Athens (Greece), 2024.

  • G. De Pasquale, F. Ursi, "Multi-material fittings with carbon fiber reinforcement from AM process: design and characterization", proc. 3rd Int. Symp. on Industrial Engineering and Automation (ISIEA), Bolzano (Italy), 2024.

  • Mirjam Spuller, Nina Kovac, Peter Rodic, Lukasz Major, Simon Chwatal, Mattia Cabrioli, Matteo Vanazzi, Giorgio De Pasquale, Jurgen Lackner, Reinhard Kaindl, Wolfgang Waldhauser. "Cerium-containing hexamethyldisiloxane coatings for corrosion protection of a laser-based powder bed fusion fabricated AlSi10Mg0.3 alloy", Surface & Coatings Technology, vol. 506, 132094 (2025).

  • Mirjam Spuller, Nina Kovac, Peter Rodic, Simon Chwatal, Mattia Cabrioli, Matteo Vanazzi, Giorgio De Pasquale, Jurgen Lackner, Reinhard Kaindl, Wolfgang Waldhauser. "Corrosion protection of L-PBF AlSi10Mg. Atmospheric pressure plasma deposition of hexamethyldisiloxane coating", European Corrosion Congress (EUROCORR), Stavanger, Norway (2025).

  • Antonio Coluccia, Giorgio De Pasquale, “A multiscale-based methodology for the fatigue failure analysis of additively manufactured lattice structures applied to the four-point-bending test”, International Journal of Fatigue, 200, 109122 (2025).

  • Sara Varetti, Luca Margaria, Antonio Coluccia, Giorgio De Pasquale, Alessandro De Zanet, Evanthia Pappa, Abhishek Kumar, Mattia Cabrioli, Matteo Vanazzi, "Fatigue characterization of AlSi10Mg alloy from variable L-PBF processing parameters addressed to hybrid joints of aerostructures", European Powder Metallurgy Association Congress & Exhibition (EUROPM), Glasgow (UK), 2025.

  • Mattia Cabrioli, Maria Silva Colmenero, Matteo Vanazzi, Sara Varetti, Abhishek Kumar, E. Pappa, Luca Margaria, Giorgio De Pasquale, Barbara Perez, Joan Bellver, "Upcycling AlSi10Mg scrap metal from multi-material joints through atomization and generation of aerospace-grade metal powders", European Powder Metallurgy Association Congress & Exhibition (EUROPM), Glasgow (UK), 2025.

  • Evanthia Pappa, Abhishek Kumar, F. Danzi, A. Campilungo, Ciro Annicchiarico, Nicola Gallo, Mattia Cabrioli, Maria Silva Colmenero, Matteo Vanazzi, Boris Fošnarič, Tina Černelič, Valter Capitani, Stefano Pasquino, Luca Margaria, Fikret Enes Altunok, Antonio Coluccia, Giorgio De Pasquale, "Joining technologies combining CFRPs and 3D metal anchors for aeronautical structural parts: case study - vertical stabilizer", Society for the Advancement of Material and Process Engineering Conf. (SAMPE EUROPE), Amsterdam, 2025.

  • Evanthia Pappa, Abhishek Kumar, Ciro Annicchiarico, Nicola Gallo, Mattia Cabrioli , Maria Silva Colmenero, Matteo Vanazzi, Boris Fošnarič, Tina Černelič, Luca Margaria, Fikret Enes Altunok, Antonio Coluccia, Giorgio De Pasquale. "Sustainable aviation through a novel multi-material joint technology for aeronautical applications", 15th European Aerospace Science Network Int. Conf. (EASN), Madrid, 2025.

  • Giorgio De Pasquale, Fikret Enes Altunok. “Multiphase modeling of matrix/fiber-related damaging mechanism in multimaterial additively manufactured joints with 3D interlocking”, Engineering Failure Analysis, 170, 109272 (2025).

  • F. Ursi, G. De Pasquale, "Comparative characterization of FDM structures with electrically-conductive sensing elements under static, dynamic and thermal loads", Nature Scientific Reports, vol. 15, 26877 (2025).